1. PROPOSED RIPRAP
      2. ALONG THE
      3. NAME OF STREAM
      4. AT OR NEAR

NOTE:
Use of U.S.G.S. quadrangle map(s) is
recommended.
NOTES:
1. Minimum recommended side slope ratio
is 1.5 Horizontal: 1 Vertical.
2. Show any other cross-sections needed
to adequately describe the scope of
work.
3. Minimum recommended riprap toe
dimensions are x = 2’ and y = 1’. Design
criteria would vary with size of riprap
used.
4. Registered Professional Engineer’s
Certification and Seal are usually not
required for this type of project.
PROPOSED RIPRAP
ALONG THE
NAME OF STREAM
AT OR NEAR
TOWN, TOWNSHIP & COUNTY

Back to top