Scale: 1 in. = ____ mi.
Use of U.S.G.S. quadrangle
map(s) is recommended.
1. Detailed drawings must include all structures with
dimensions and elevations.
2. Drawings must also show maximum mooring area, i.e.,
the area occupied by boats/ships at the docking facilities
(Number, length and width of boats/ships and
approximate mooring location must be shown).
3. Normal pool elevation or Low water line must be shown
on all drawings.
BOAT RAMP, PIER,
JETTY OR GROIN
IN / ALONG THE
NAME OF STREAM
RIVER / LAKE
AT OR NEAR
TOWN, TOWNSHIP & COUNTY